Hope-tech Direct Mount stem Bedienungsanleitung PDF herunterladen (Seite 2)

STEP 4:

When you are satised with the handlebar position and orientation,

tighten rst the 2 top clamp bolts to 9-10 Nm. Alternate between the

2 bolts until torque setting is achieved and the top of each clamp is

sitting ush against the stem body.

STEP 4:

When you are satised with the handlebar position and orientation,

alternatively tighten the 4 bolts screwed into the top crown in a

cross pattern to 10-12N.m

STEP 5:

Install and tighten the 2 remaining M6x25mm bottom clamp bolts to

9-10 Nm. Alternate between the 2 bolts until torque setting is achieved.

There should be an assembly gap between the clamps and the stem body

STEP 5:

Install and tighten the 2 remaining M6x25mm bottom clamp bolts to

9-10 Nm. Alternate between the 2 bolts until torque setting is achieved.

There should be an assembly gap between the clamps and the stem body

40mm DIRECT MOUNT STEM INSTALLATION: 50mm DIRECT MOUNT STEM INSTALLATION:

STEP 2:

Install the direct mount stem on the top of the upper crown and thread

in by hand the 2x M6x18mm bolts

STEP 1:

Remove the existing stem if present

STEP 1:

Remove the existing stem if present

STEP 2:

Install the direct mount stem on the top of the upper crown and thread

in by hand the 4x M6x18mm bolts. Tighten the 4 bolts in a cross pattern

to 10-12 Nm torque

STEP 3:

Install the handlebar in the desired position and t the 2 top clamps.

Install the 2x M6x25mm top clamp bolts and slightly tighten them

STEP 3:

Install the handlebar in the desired position and t the 2 top clamps.

Thread by hand the 2x M6x40mm bolts and slightly tighten them

2 x M6x18mm

2 x M6x40mm

2 x M6x25mm

9-10 N.m

Assembly gap

4 x M6x18mm

10-12 N.m

2 x M6x25mm

9-10 N.m

2 x M6x25mm

9-10 N.m

2 x M6x25mm

9-10 N.m

[email protected] hopetech.com

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Hope-tech Direct Mount stem Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Hope-tech Direct Mount stem